JLA Error Codes

Take a look at our handy lists of JLA fault codes below to determine what’s wrong with your machine.

Model: WASHER

Fault Code	Fault
F10	TEMPERATURE NOT REACHED WITHIN MAX TIME FRONT BOARD/POWER
F10	F11	NTS PROBE OR CIRCUIT FAILURE
F12	F11	NTS SHORT CIRCUIT
F12	F13	LEVEL SENSOR VOLTAGE LESS THAN .35VOLTS H-02
F14	F13	P00 DOES NOT CORRESPOND WITH POWER BOARD,RESISTANCE R7 FAULT
F14	F14/F20	CHECK FRONT BOARD BLOWN TRACKS AND POWER BOARD
F15	F14/F20	DOOR NOT CLOSED DURING OPERATION
F15	F20	CONNECTION ON THE CHOPPER MODULE
F21	F20	FREE-RUNNING DIODE SHORT CIRCUIT
F21	F22	MAINS SURGE VOLTAGE
F23	F22	IGBT SHORT CIRCUIT OR RELAY DEFECTIVE/CHECK MOTOR/CARBONS
F23	F24	CHECK MOTOR/BOARD MOTOR SPEED SENSOR DEFECTIVE
F25	F24	TEMPERATURE DEFECTIVE
F25	F26	MAINS FAILURE
H00	F26	CHILD SAFETY DEVICE
H00	H01	WATER LEVEL NOT REACHED WITHIN 6MIN
H02	H01	WATER DIDN’T DRAIN.
H02	H03	DOOR NOT CLOSED,INSPECT DOOR LOCK
H04	H03	UNBALANCE TOO HIGH

Model: 6KG DRY

Fault Code	Fault
F10	DRYING TOO SLOW
F10	F11	FAILURE OF NTC PROBE OR CIRCUIT
F12	F11	SHORT CIRCUIT IN THE PROBE CIRCUIT
F12	F14	P00 DOES NOT CORRESPOND WITH POWER BOARD,RESISTANCE R7 FAULT
F15	F14	NTC PROBE FOR OUT GOING AIR INTERRUPTED
F15	F16	NTC PROBE FOR OUT GOING AIR SHORT CIRCUITED
F17	F16	HEATING FAILURE CHECK ELEMENTS & CUTOUTS SEE TM226/ CHECK REAR BEARING
F17	H00	CHILD SAFETY DEVICE
H01	H00	NO FUNCTION ON THE MDB DRIER
H01	H02	COOLING WATER OUTFLOW
H03	H02	DOOR NOT CLOSED
H03	H04	FLUFF FILTER IS BLOCKED

Need assistance with your JLA machine? Call us now on [ld_default] to book an engineer. We’re always here to help

Gary Slater

19:58 07 Aug 19

We have been using this company for many years to service and repair our Laundry Equipment nationwide, they have never let us down and the response time is excellent!! Good Guys!! Highly Recommended!!

Clive Cantrill

15:01 14 Sep 19

Very happy with my new stacker, super convenient and easy to use and takes up so little floor space. Impressed with functionality and ease of use. Gary programmed in our own programs

Reni Adebayo

14:10 14 Sep 19

It was a tricky installation. Other suppliers either declined or gave us ridiculous prices. The Aventus lads sorted it all out for us on the day. Great service, they couldn’t do enough for us.

shahin abbasi

15:31 14 Sep 19

Happy with my Danube washers and dryers. Polite and efficient installers. Looking forward to the wifi I've been promised.

Julian Lees

16:35 18 Aug 19

Tim Bellamy

14:22 01 Oct 19

I got a great CAD plan of my future laundry and all the equipment was fully explained. Price were reasonable. Easy to make a decision. And thankfully they were installed without hassle and they are working nicely. Good job and thanks.

Navi Sandhu

18:01 14 Oct 19

Nice installation of specially programmed machines in my Care home Replaced my old machines which my staff were struggling with. Quick process. Many thanks

darren

22:30 26 Sep 22

Very dishonest people.When I first contacted them I explained that I needed to buy some machines and needed something quite quickly.They told me what I needed to hear, it turns out they are salesman with no allegiance to their customer.I was told I'd receive machines in 3 weeks as they were already in stock and just needed to be shipped, 2 months later when I asked for a refund they refused and said it was a special order. It took over 3 months and responses during that time were slow to say the least. I'd advise using a more reputable company, especially if you're a smaller business as it can be costly with the wait times. For the money they cost me I'll be glad to return the favour, as reading reviews like this will put some potential future customers off dealing with them. The less than reputable people I encountered were Mike Ward and the company director Gary Flatt.