Girbau Error Codes

Seeing an error code on your Girbau machine but don’t know what it means? Have a look at our code guide below.

Model: HS-5008

Fault Code	Fault
ALM/A-*	FAULTY WATER INLET / SLOW FILL
ALM/A-*	ALM/E	MACHINES WITH PUMP DRAIN BLOCKED DRAIN/PUMP
ALM/L	ALM/E	LEAKAGE IN THE ELECTROVALVE(failed level sensor)
ALM/L	ALM/SL	BATH LEVEL EXCEEDED
ALM/C	ALM/SL	DEFECT IN TEMP PROBE/DEFECT IN HEATING CIRCUIT
ALM/C	ALM/Prob	DEFECT IN TEMP PROBE
ALM/BAL	ALM/Prob	DEFECT IN THE UNBLANCE CONTROL SWITCH (OPEN CIRCUIT)
ALM/BAL	ALM/VAR*	INVERTER ALARMS.SEE INVERTER FAULT CODES
VARO	ALM/VAR*	COMMUNICATION ALARM BETWEEN INVERTER AND MICROPROCESSOR FAULTY INVERTER SUPPLY, FAULTY WIRING BETWEEN MICROPROCESSOR
VARO	VAR1	DISCONNECTION OF INVERTER BY SELF-PROTECTION,IF THE ALARM IS PERMANENT INDICATES INVERTER BREAKDOWN
VAR2	VAR1	FAILURE ON THE COMMUNICTION SYSTEM DETECTED BY THE INVERTER INVERTER BREAK DOWN, MICROPROCESSOR BREAK DOWN
VAR2	VAR3	OVER CURRENT IN INVERTER MECHANICAL OBSTRUCTION OF THE TRANSMISSION SYSTEM FAULTY INVERTER SUPPLY FAULTY WIRING OR CONN TO MOTOR FAULTY MOTOR FAULTY INVERTER
VAR4	VAR3	DISCONNECTION OF MOTOR KLIXON MOTOR KILXON OPEN FAULTY INVERTER
VAR4	VAR5	OVER VOLTAGE IN INVERTER DC LINT CIRCUIT FAULTY INVERTER SUPPLY INVERTER BREAK DOWN
VAR6	VAR5	OVERHEATING IN INVERTER INVERTER FAN BREAKDOWN/INVERTER
VAR6	VAR7	FAILURE IN INVERTER FAULTY INVERTER
VAR8	VAR7	INVERTER BREAKDOWN

Need assistance with your Girbau machine? Call us now on [ld_default] to book an engineer. We’re always here to help

Gary Slater

19:58 07 Aug 19

We have been using this company for many years to service and repair our Laundry Equipment nationwide, they have never let us down and the response time is excellent!! Good Guys!! Highly Recommended!!

Clive Cantrill

15:01 14 Sep 19

Very happy with my new stacker, super convenient and easy to use and takes up so little floor space. Impressed with functionality and ease of use. Gary programmed in our own programs

Reni Adebayo

14:10 14 Sep 19

It was a tricky installation. Other suppliers either declined or gave us ridiculous prices. The Laundry Services And Supplieslads sorted it all out for us on the day. Great service, they couldn’t do enough for us.

shahin abbasi

15:31 14 Sep 19

Happy with my Danube washers and dryers. Polite and efficient installers. Looking forward to the wifi I've been promised.

Julian Lees

16:35 18 Aug 19

Tim Bellamy

14:22 01 Oct 19

I got a great CAD plan of my future laundry and all the equipment was fully explained. Price were reasonable. Easy to make a decision. And thankfully they were installed without hassle and they are working nicely. Good job and thanks.

Navi Sandhu

18:01 14 Oct 19

Nice installation of specially programmed machines in my Care home Replaced my old machines which my staff were struggling with. Quick process. Many thanks

darren

22:30 26 Sep 22

Very dishonest people.When I first contacted them I explained that I needed to buy some machines and needed something quite quickly.They told me what I needed to hear, it turns out they are salesman with no allegiance to their customer.I was told I'd receive machines in 3 weeks as they were already in stock and just needed to be shipped, 2 months later when I asked for a refund they refused and said it was a special order. It took over 3 months and responses during that time were slow to say the least. I'd advise using a more reputable company, especially if you're a smaller business as it can be costly with the wait times. For the money they cost me I'll be glad to return the favour, as reading reviews like this will put some potential future customers off dealing with them. The less than reputable people I encountered were Mike Ward and the company director Gary Flatt.